Home » Shop » Fuel » Injector Dynamics » Toyota » Supra Turbo 93-98 2JZ-GTE (14mm) » ID2600-XDS, for Supra Turbo 1993-1998 / 2JZ-GTE applications. Currently top fed. 14mm (purple) top. Set of 6.
SHIPPING NOTICE - US Postal Service is still being affected by widespread delays and service interruptions. For any time-sensitive needs, we strongly recommend shipping with UPS.

Ballenger Motorsports Email
[Login]
  News | Home > Shop > Fuel > Injector Dynamics > Toyota > Supra Turbo 93-98 2JZ-GTE (14mm) > ID2600-XDS, for Supra Turbo 1993-1998 / 2JZ-GTE applications. Currently top fed. 14mm (purple) top. Set of 6.    My Account  |  cart button  0 Items ($0.00)   |  Checkout  
Categories
New Products
Clearance
Connectors / Harnesses
Data Logging/Dash Systems
Engine Control
Forced Induction
Fuel
  Cleaning Service
  Filters / Fittings
  Injector Dynamics
    Audi
    BMW
    Buick
    Cadillac
    Can Am
    Chevrolet
    Dodge / Chrysler
    Ford
    Holden
    Honda/Acura
    Hyundai
    Infiniti
    Kawasaki
    Lamborghini
    Lexus
    Lotus
    Mazda
    Mitsubishi
    Nissan
    Polaris
    Pontiac
    Porsche
    Saturn
    Scion
    Sea-Doo
    Ski-Doo
    Subaru
    Suzuki
    Toyota
      Celica GT (00-05) 1ZZ-FE
      Celica GTS (00-05) 2ZZ-GE
      Corolla CE, S, LE (03-04)
      Corolla GTS (83-87) 4AGE
      FJ Cruiser / 4Runner / Tundra
      Landcruiser
      Matrix (01-03)
      MR-2 N/A (90-96) 5SFE
      MR-2 Spyder (00-05) 1ZZ-FE
      MR-2 Turbo (90-96) 3S-GTE (11mm)
      MR-2 Turbo (90-96) 3S-GTE (14mm)
      Supra NA (93-98) 2JZ-GE
      Supra Turbo (87.5-92) 7M-GTE
      Celica All-Trac 89-99 3S-GTE 11m
      Celica All-Trac 89-99 3S-GTE 14m
      Supra Turbo 93-98 2JZ-GTE (11mm)
      Supra Turbo 93-98 2JZ-GTE (14mm)
    Universal
    Volkswagen
    Yamaha
  Injectors
  Pumps
Gauges
Heat Shrink
Ignition
Merchandise
Relays / Fuses
Sensors
Tools
Wideband O2
Wiring
Application Specific
  • BMW 335i F30
  • Dodge Ram 5.9L Cummins ISB
  • Duramax 6.6L LB7 2003
  • Ford Mustang 5.0L V8
  • GM LM7 Parts
  • GM LS1 Parts
  • GM LS2 Parts
  • GM LS3 Parts
  • GM LS6 Parts
  • GM LS7 Parts
  • GM LSA Parts
  • GM LT1 Classic
  • GM LT1 Modern
  • GM LT5 Parts
  • Honda Fit
  • Honda K20
  • Honda K24
  • Mazda Miata
  • Mazda MX-5 Miata ND
  • Mazda MX-5 NC Miata
  • Nissan VQ35
  • Nissan VR38DETT
  • Subaru BRZ FA20 FRS
  • Toyota 1JZ Family
  • Toyota 1UZ-FE Parts
  • Toyota 2JZ Family
  • Toyota MR2 Turbo
  • Connector Kit Quick Search
    Number of Ways
    · 1-Way · 2-Way · 3-Way · 4-Way
    · 5-Way · 6-Way · 7-Way · 8-Way
    · 9-Way · 10-Way · 12-Way · 14-Way
    · 16-Way · 17-Way · 18-Way · 20-Way
    · 22-Way · 24-Way · 26-Way · 28-Way
    · 31-Way · 32-Way · 36-Way · 50-Way
    · 54-Way · 60-Way · 80-Way

    Pigtail Quick Search
    Number of Ways
    · 1-Way · 2-Way · 3-Way · 4-Way
    · 5-Way · 6-Way · 7-Way · 8-Way
    · 9-Way · 10-Way · 12-Way · 14-Way
    · 16-Way · 18-Way · 20-Way · 36-Way
    · 50-Way · 60-Way

    Join our FREE Email Mailing List!
    Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon Join our FREE Email Mailing List & Receive Discount Coupons
    For Email Marketing you can trust
    Connect With Us…
    News & Articles
    Temperature Sensor Calculator
    Latest News & Updates
    Part Identification Guide
    Photo Submission Guide
    Connectors, Connector Kits & Pigtails
    Terminal Crimp Validation Charts
    Frequently Asked Questions
    Information
    AFR500 Dealer Network
    About Us
    Terms and Conditions
    Net Terms / PO
    Contact Us
    Privacy Notice
    Order Tracking
    Print Catalog
    Return Policy
    Shipping Info
    Estimate Shipping
    Shopping Cart more
    0 items
    Manufacturer Info
    See Other Products From This Manufacturer
    Injector Dynamics
    What's New? more
    Yazaki 375 Male Terminal for 10-8AWG
    Yazaki 375 Male Terminal for 10-8AWG
    $0.69
    Search
    Term
    Search in Descriptions
    Category


    Advanced Search
    ID2600-XDS, for Supra Turbo 1993-1998 / 2JZ-GTE applications. Currently top fed. 14mm (purple) top. Set of 6. Part # MOTR-84823

    ID2600-XDS, for Supra Turbo 1993-1998 / 2JZ-GTE applications. Currently top fed. 14mm (purple) top. Set of 6.
    Pricing
    1 + $2,173.50
    Information
    Bmotorsports Part # MOTR-84823
    Availability In Stock
    Shipping Weight 0.085 Lbs.
    Shipping Location VA   (Shipping Info)
    Options
    Plug-n-Play
    Ship Estimator Quantity:

    Description

    The ID2600-XDS is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport.

    The ID2600-XDS was developed specifically for use with liquid fuels, featuring corrosion resistant internals, and long term compatibility with ethanol and methanol.

    The ID2600-XDS has the highest flow rate of any injector offered by Bosch, and flows 50% more than the ID1700x.

    The ID2600-XDS benefits from Dual Slope Matching, a method of matching the flow rate in both the linear, and nonlinear operating range, providing better cylinder to cylinder consistency at low pulse widths.

    For a non vehicle specific version of this injector please see our part # MOTR-84664

    What is Dual Slope Matching

    Dual Slope Matching is a method of matching injectors that provides the best possible cylinder to cylinder fueling across the entire operating range.

    Traditionally, injectors were matched based on static flow rate alone, which resulted in large deviations at low pulse widths.

    Injector Dynamics introduced Slope Intercept Matching over a decade ago, which provided even cylinder to

    cylinder fueling across the linear operating range of the injector.

    With the progression of turbo technology, and increased use of alcohol fuels, greater demands are placed on fuel injectors, and they are often required to deliver fuel well outside of their linear operating range.

    The concept of Dual Slope Matching extends the injector matching into the lower non linear operating range. Dual Slope Matching was conceived by Aaron Looft of Injector Dynamics, who was inspired by the dual slope injector characterization model used by Ford.

    How Does Dual Slope Matching Work?

    Let’s first consider static flow matching which was the industry standard prior to Injector Dynamics.

    The graph below shows the dynamic response of two hypothetical 1500 cc/min injectors within their linear operating range. One with an offset (Dead time, latency, etc.) of 0.95 milliseconds, and one with an offset of 0.85 milliseconds.

    The slope of both lines is the same, as they have the same flow rate, but the difference in offset results in the injector with the higher offset delivering 2.5 uL less fuel per injection event. At a pulse width of 19msec, which equals 90% duty cycle at 6,000 rpm, 2.5ul amounts to a mere 0.6% difference in flow between the two injectors, but at 2msec, that same 2.5ul difference amounts to a 9.5% difference!

    Slope Intercept matching as introduced by Injector Dynamics in 2007 solved this problem by matching injectors based on flow rate (Slope) and offset (Intercept) providing even cylinder to cylinder fueling across the linear operating range.

    Moving on to the non linear operating range, the graph below shows a pair of 1500cc injectors matched using the Injector Dynamics Slope Intercept method. Both injectors have the same flow rate and offset, but in the non linear range, the flow deviates from the straight line shown in the graph above. In this case, the flow rate, or slope of each injector in the non linear range is 1530cc/min and 1470cc/min representing a spread of +/- 2%.

    As the graph clearly shows, the difference between the two injectors increases as pulse width decreases.

    Shown as percent difference in flow, we see that even though the injectors are matched perfectly in the linear operating range, the difference in slope in the non linear range results in a flow mismatch that is magnified as the pulse-width decreases, becoming substantial at the very lowest pulse widths.

    How Well Does This Work in Practice?

    Moving from hypothetical injectors to a real world application, the response in the non linear range is considerably less orderly than shown in the graphs above, and is quantified using a technique called Least Squares Linear Regression – Which is a fancy way of saying straight line approximation.

    By approximating the response in the non linear range, and matching sets accordingly, the best possible cylinder to cylinder fueling is realized across the entire operating range.

    Using the ID2600-XDS as an example, the traditional Slope Intercept method of matching results in an average deviation of +/-5.1% in the non linear range, while the new method of Dual Slope Matching has reduced this to +/-1.4%

    In a perfect world, this deviation would not exist at all, but for those of us who live (And tune!) in the real world, Dual Slope Matching represents a large step forward, and we are proud to offer it to the market.


    Specs

    • Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)
    • Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.
    • Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro Methane
    • Electrical Connector – USCAR


    Drawings

    Most applications fall into one of four standard fitments consisting of two standard lengths, (48mm or 60mm) and 2 standard fuel rail bores (11mm, or 14mm) The 3D models pictured below give the relevant dimensions of these standard fitments.

    ID1700-34-11

    ID1700-34-14

    ID1700-48-11

    ID1700-48-14

    ID1700-48B

    ID1700-60-11

    ID1700-60-14

    ID1700-WRXB


    Slope & Offset vs Pressure Table

    Fuel Pressure
    (psid)
    Offset
    (µsec)
    Slope
    (cc/min)
    8 Volts 10 Volts 12 Volts 14 Volts 16 Volts 18 Volts
    43.5 1340 880 605 440 315 275 2600
    45.0 1365 895 620 450 325 285 2645
    50.0 1450 955 675 485 350 305 2780
    55.0 1540 1010 730 520 370 325 2900
    60.0 1635 1060 770 555 395 350 3025
    65.0 1730 1115 800 590 420 380 3140
    70.0 1825 1165 830 625 450 415 3255
    75.0 1935 1225 870 660 485 445 3370
    80.0 2050 1285 915 690 525 475 3485
    85.0 2175 1350 955 745 585 520 3595
    90.0 2320 1410 995 745 585 520 3680
    95.0 2485 1465 1030 765 605 540 3755
    100.0 2670 1520 1060 780 615 550 3810


    Plug n' Play Data

    Are you tired of pouring over logs, making corresponding changes to your tune, only to find that what worked one day is off by the next? Have you wasted hours sifting through a myriad of injector related forum posts, only to find that there is no simple solution? Such is the nature of tuning with inaccurate injector data.

    Accurate injector characterizations are the basis of all fueling calculations, so it’s no wonder that if you’re tuning without them, you will spend a lot of valuable time making the best of a bad situation. It will keep you busy searching for endless combinations of mostly incorrect answers, and it will rob you of the most basic functions provided by the guys who spent millions of R&D dollars designing the engine management system for your car.

    Whether you are a professional tuner, or an end user, you can spend countless hours getting it “mostly correct” or you can copy and paste accurate characterization tables and get on with the job of maximizing performance and drivability.

    Injector Dynamics is the only motorsport injector supplier capable of generating these OEM quality injector characterizations, and our engineering services are available to generate data for new platforms and applications at no cost to our customers.

    We welcome the opportunity to provide solutions where none previously existed, and it is this commitment to value and innovation that has earned us our position as the industry leader.

    Remember that next time you hear The Same as Injector Dynamics but Cheaper

    The data located HERE is in a constant state of improvement, so if you are a regular user, check back often for updates. If you have any issues downloading, or using the data, or would like to inquire about developing data for a new application, feel free to contact us directly.





    Sales Policies
    Ballenger Motorsports - High Performance Electronics accepts all major credit cards, including international cards. We also accept Paypal, Check, Money Order and Purchase Orders with account approval.

    IO-
    Shop With Confidence
    • Most orders placed before 1:30PM eastern time get shipped out on the same day!
    • Secure SSL encrypted shopping!
    • Interested in Net Terms?



    Powered by osCommerce.
    Copyright © 2006-2024 Ballenger Motorsports, Inc. All Rights Reserved.