| Image |
Product Name |
Part #+ |
Weight |
Price |
Availability |
Add to Cart |
|
45deg Stainless Steel O2 Bung - 45 degree angle where standard bungs may not fit. |
SNSR-01053 |
0.2 Lbs. |
| $15.99 | | 5+ | | $14.75 | | 10+ | | $14.50 | | 25+ | | $13.00 | | 50+ | | $12.49 |
|
 |
|
|
Extended Stainless Steel Wideband O2 Sensor Fitting (less restriction in small diameter pipes) - Weld in type - Female Nut |
SNSR-01054 |
0.2 Lbs. |
| $7.99 | | 5+ | | $7.75 | | 10+ | | $7.50 | | 25+ | | $7.25 | | 50+ | | $6.99 | | 100+ | | $6.49 |
|
|
|
|
Steel Wideband O2 Sensor Fitting - Weld in type - Female Nut |
SNSR-01061 |
0.1 Lbs. |
| $4.99 | | 5+ | | $4.75 | | 10+ | | $4.50 | | 25+ | | $4.25 | | 50+ | | $3.99 | | 100+ | | $3.49 |
|
|
|
|
Steel Wideband O2 Sensor Plug - Male Screw |
SNSR-01062 |
0.1 Lbs. |
| $4.99 | | 5+ | | $4.75 | | 10+ | | $4.50 | | 25+ | | $4.25 | | 50+ | | $3.99 | | 100+ | | $3.49 |
|
|
|
|
45deg Steel O2 Bung - 45 degree angle where standard bungs may not fit |
SNSR-01063 |
0.2 Lbs. |
| $9.99 | | 5+ | | $9.75 | | 10+ | | $9.50 | | 25+ | | $9.00 | | 50+ | | $8.49 |
|
|
|
|
Extended Steel Wideband O2 Sensor Fitting (less restriction in small diameter pipes) - Weld in type - Female Nut |
SNSR-01064 |
0.2 Lbs. |
| $8.99 | | 5+ | | $8.75 | | 10+ | | $8.50 | | 25+ | | $8.25 | | 50+ | | $7.99 | | 100+ | | $7.49 |
|
|
|
|
HBX-1 (Heat-Sink Bung Extender)
Options- Index Washer : QTY 1 - M18x15 (+$1.00) , None, QTY 2 - M18x15 (+$2.00) , QTY 3 - M18x15 (+$3.00)
|
SNSR-01065 |
0.3 Lbs. |
|
|
 |
|
M18 x 1.5 Copper Indexing Washer for HBX-1 |
SNSR-01066 |
0.003 Lbs. |
|
|
|
|
3/8 NPT Aluminum Bung / Weld Fitting for Temperature Sensors |
SNSR-02035 |
0.074 Lbs. |
| $8.99 | | 5+ | | $8.75 | | 10+ | | $8.50 | | 25+ | | $8.25 | | 50+ | | $7.99 | | 100+ | | $7.49 |
|
|
|
|
1/8 NPT Aluminum Bung / Weld Fitting for Temperature Sensors |
SNSR-02036 |
0.074 Lbs. |
| $5.99 | | 5+ | | $5.75 | | 10+ | | $5.49 | | 25+ | | $4.99 | | 50+ | | $4.49 | | 100+ | | $3.99 |
|
|
|
|
1/8 NPT DTM Air Temperature Sensor ( AIT / MAT / ACT)
Options- Mounting Option : None, Aluminum Weld Fitting (+$6.99)
|
SNSR-02100 |
0.09 Lbs. |
| $39.99 | | 10+ | | $38.99 | | 50+ | | $34.99 | | 100+ | | $33.99 | | 400+ | | $32.99 |
|
|
|
|
1/8 NPT DTM Air Temperature Sensor Kit( AIT / MAT / ACT)
Options- Mounting Option : None, Aluminum Weld Fitting (+$6.99)
|
SNSR-02100CK |
0.09 Lbs. |
| $43.79 | | 10+ | | $42.99 | | 50+ | | $41.99 | | 100+ | | $37.99 | | 400+ | | $35.99 |
|
|
|
|
1/8 NPT Fluid Temperature Sensor ( ECT / CLT / TFT / OLT) with Deutsch DTM Connection System
Options- Mounting Option : None, Aluminum Weld Fitting (+$6.99)
|
SNSR-02101 |
0.09 Lbs. |
| $39.99 | | 10+ | | $38.99 | | 50+ | | $34.99 | | 100+ | | $33.99 | | 400+ | | $32.99 |
|
 |
|
|
1/8" NPT DTM Fluid Temperature Sensor Kit ( ECT / CLT / TFT / OLT)
Options- Mounting Option : None, Aluminum Weld Fitting (+$6.99)
|
SNSR-02101CK |
0.09 Lbs. |
| $43.79 | | 10+ | | $42.99 | | 50+ | | $41.99 | | 100+ | | $37.99 | | 400+ | | $35.99 |
|
|
|
|
Autosport Labs PodiumConnect 3.5G Telemetry
Options- Harness Type : AiM SmartyCam
- SIM Card Option : Include VERIZON SIM card
Out of stock |
SNSR-07000 |
2 Lbs. |
|
 |
|
|
Autosport Labs PodiumConnect 4G
Options- Harness Type : Generic Harness / Flying Leads, AiM SmartyCam, MoTeC C125/CDL3 Deutsch DTM 6-pin connector, AEM harness, VBOX Harness
|
SNSR-07004 |
2 Lbs. |
|
|
|
|
Spec Miata CAM Sensor Pigtail |
SNSR-100561 |
0.15 Lbs. |
| $125.00 | | 5+ | | $119.99 | | 10+ | | $114.99 | | 25+ | | Call |
|
|
|
|
Unlimited Miata CAM Sensor W/Shielded Harness
Options- Harness Length : 1.5M (4.95ft), 2.5M (8.2ft) (+$25.00) , No Harness (-$75.00)
|
SNSR-100563 |
0.15 Lbs. |
| $250.00 | | 5+ | | $244.99 | | 10+ | | $239.99 | | 25+ | | Call |
|
|
|
|
Unlimited Miata Crank Sensor W/Shielded Harness
Options- Harness Length : 1.5M (4.95ft), 2.5M (8.2ft) (+$25.00) , No Harness (-$75.00)
|
SNSR-100564 |
0.15 Lbs. |
| $250.00 | | 5+ | | $239.99 | | 10+ | | $229.99 | | 25+ | | Call |
|
|
|
|
Production Miata CAM Sensor with Connector Kit
Options- Connector Option : Kit (Terminals + Seals), Pigtail with wire leads (+$2.50)
- VVT option : For non VVT engine, FOR VVT engine (+$22.00)
|
SNSR-100565 |
0.15 Lbs. |
| $75.00 | | 5+ | | $69.99 | | 10+ | | $64.99 | | 25+ | | Call |
|
|
|
|
Toyota Knock Sensor Stud, 12mm Adapter |
SNSR-159002 |
0.02 Lbs. |
|
|
|
|
Continental Ethanol Content Sensor / Flex Fuel Sensor Kit
Options- Connector Option : Kit (Terminals + Seals), Pigtail with wire leads (+$2.99) , None (-$6.99)
- Fuel Fittings : None, 2 of 3/8 Hose Barbs (+$11.50) , -6AN & 3/8 Hose Barb (+$22.25) , 2 of -6AN (+$33.00)
- Mounting Option : None, 3D Printed Bracket (+$7.99)
|
SNSR-25032 |
0.48 Lbs. |
| $99.99 | | 10+ | | $94.99 | | 100+ | | Call |
|
|
|
|
Special Order or Custom Part |
SPCL-0001 |
0.000027 Lbs. |
|
|
|
|
Special or Custom Order Pigtail |
SPCL-0004 |
0.027 Lbs. |
|
|
|
|
eForce® - Battery Powered Crimping Tool
Options- Crimper : Crimper with Case, Battery and Charger, Crimper with Case, 2 Batteries, and Charger (+$59.00) , Crimper with Case ONLY (-$220.00)
|
TOOL-00888 |
12.38 Lbs. |
|
|
|
|
Bench Mount for eForce Crimping Tool |
TOOL-00891 |
0.2 Lbs. |
|
|
|
|
Tool Carrying Case
Out of stock |
TOOL-00897 |
3 Lbs. |
|
|
|
|
Replacement Wire Stop Assembly for Production Quality Crimp System |
TOOL-00898 |
0.1 Lbs. |
|
Available: 1 |
|
|
Production Quality One-Step Crimp handles ( Crimps Copper & Seal or Insulation in one cycle ) for use with production quality dies |
TOOL-00899 |
1.38 Lbs. |
| $129.99 | | 5+ | | $128.99 | | 10+ | | $125.99 | | 25+ | | $121.99 |
|
|
|
|
Large Case for Production Quality Crimp Dies - Holds 10 Production Quality Crimp Dies |
TOOL-00902 |
3 Lbs. |
|
Available: 2 |
|
0 Items ($0.00)
| Checkout 
New Products
Connectors / Harnesses
