** Special Note: We have ONE SET OF 5 of the old ID line (replaced by the new IDx series) and have a limited quantity of these injectors remaining. This is 48mm (without the adapter) o-ring to o-ring body length with 14mm top and bottom o-ring diameters, and is 60mm o-ring to o-ring with the 14mm top adapter. Includes the purple 14mm top adapter and connector kit
Injector Dynamics ID725 715 cc/min Injector
Extreme flow & excellent control are the reason so many tuners favor these injectors. More charts and data to be posted shortly.
These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher.
Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.
- Excellent response characteristics
- Robust Design
- High Impedance
- Low Impedance performance characteristics with High Impedance Compatibility
- Based on excellent Bosch EV14 injectors
- Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
- Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
- Fitted with 14mm Viton upper and lower o-rings.
- Static Flow Rate @ 43.5PSI (300kPa / 3 bar): 715cc/min (+/-3%)
- Overall Length: 68.1mm
- Dimensions: 61.8mm o-ring seat to seat
- Perfect for 4 valve head applications looking for a high flow, wide dynamic range injector with superb idle quality